Kelley DSH Series Dock Seal With Stationary Head Curtain

A hood-style head curtain seals the rear of the trailer, accommodating a variety of trailer heights. The DSH model is ideal for doors that are 9' high or taller. End caps secure the drop curtain to the side pads. Durable fiberglass stays provide stiffness in the top of the curtain for better moisture drainage. Rugged, roll-formed Tufsteel™ galvanized steel frame increases product durability. Seamless aluminum tubing provides support for the head curtain.

Kelley Dock Seal

Features

  • Durable fiberglass stays in the top of the curtain
  • Roll-formed Tufsteel galvanized steel framing warranted for 5 years against rotting, splitting or cracking
  • Endurance-tested foam core is continuously bonded to frame surface with flexible, nonflammable adhesive
  • A wide selection of durable coated fabrics provides maximum durability.

Options

  • Foam Front
    • Foam front is sewn to the face of the hood
    • Available in 50mm thickness
  • Wear Pleats
    • Provide maximum resistance to trailer abrasion
    • Fabric pleats overlap on pad face
    • Available in 4”, 8” and 16” exposures
  • Bottom Flaps
    • Closes gap at bottom of side pads
    • Extends pad when using above-the-dock bumper
    • Cover fabric is attached to side pad bottom seams
  • Head Curtain Pull Rope Assembly
    • For easy adjustment of head curtain to various heights
  • Wear Faces
    • Provides more durability and life by adding an extra layer of fabric to the face of the pads
  • Flame-Retardant Foam and Fabric
    • Meets applicable standards

 

 

Kelley aFX® Dockleveler

With a safe and simple design, ease of maintenance, few moving parts and an affordable price the KELLEY FX® Dockleveller has become the choice of material handling operations everywhere.

It's the original Kelley air-powered dockleveler that revolutionized the industry. In addition to delivering safe, powered performance at a cost comparable to mechanical docklevelers, the aFX® features airDefense® - Kelley's proprietary stump-out and free fall protection system. The aFX is also backed by the strongest warranty in the industry, with a rated lifetime lip hinge assembly warranty, a 5-year warranty on the lifting system and an available 10-year structural warranty base on engineering approval of approved application. All of which makes it the preferred choice of warehousing operations worldwide.

Kelley aFX Dockleveler

Features

  • Kelley's airDefense® proprietary stump-out and free fall protection system with 60,000 lbs. structural dock level support legs
  • Clean Pit Kit provides 100% full access for maximum cleaning and maintenance effectiveness. The aFX Series docklevelers are the only docklevelers with an activation system designed for outside-the-pit service
  • Exclusive Lambda deck beams optimize twist resistance and stress distribution. Beams are robotically welded to deck
  • Self-cleaning, lug-type lip hinge with rated lifetime warranty
  • Automatic lip extension with every cycle. Yieldable feature prevents lip damage
  • Full operating range toe guards with two galvanized sliding guards
  • Integral support strut and lip lock for maintenance and cleaning
  • High-volume, low-pressure air bag lifting mechanism. Requires no scheduled maintenance
  • Lifting bag operates under temperature extremes of -65° to +180° F
  • Lifting bag with polyvinylchloride coated polyester fibers retains lifting effectiveness even when punctured; easily repaired with adhesive vinyl patches
  • Lifting bag, gaskets and fittings resistant to chemical washdown exposure and rodent damage
  • 10-amp fan with two-stage, single-speed, self-cleaning filter, UL-approved motor; runs off 115-volt single-phase electrical power

 

 

Kelley TS Series Rigid Frame Dock Shelter

The TS Series Rigid Frame Shelter is designed to accommodate a wide variety of door and trailer sizes while providing full-width access to the back of the trailer.

Kelley TS Series Rigid Frame Dock Shelter

Features

  • Head frame covered with translucent fiberglass with 2" side-to-side rake for water drainage
  • Overlapping wear pleats sewn to the head curtain provide extra resistance against the sharp corners of the trailer, extending the life of the shelter
  • Roll-formed Tufsteel™ galvanized steel framing (5-year warranty)
  • Flexible fiberglass stays ensure that the head and side curtain pressure is maintained on the truck body
  • High-visibility guide stripes assist drivers with proper positioning of trailer
  • Steel supports protect frame from off-center trailers

Options

  • Common Side Members
  • Single side frame shared by adjacent units
  • Special Head Member
  • For attaching top front side frames to underside of building overhang or canopy
  • 1 1/4" square tube used in place of standard head frame

Accessories

  • Metal Hoods
    • Provides maximum overhead protection
    • 16-gauge galvanized steel with 2" gutter
    • Available in 18", 24" and 36" projections
  • Bottom Pads
    • Seals gap between building foundation and trailer floor
    • Made of fabric-covered foam pad with wood backing

 

 

Kelley KI-400 Inflatable Peripheral Dock Shelter

Designed for wider and taller doorways and loading docks that serve a wide variety of trailer sizes including trailers with extended tailgates or hydraulic lifts

Kelley KI-400 Inflatable Peripheral Dock Shelter

Features

  • Head and side members adjust to seal a wide variety of trailer sizes
  • Head and side members retract completely out of the contact area
  • Provides full width and height access to interior of trailer
  • Can be interlocked with other dock equipment for improved performance
  • Minimal building wall pressure exerted through dock shelter